Keep your motorcycle operating at peak performance with H-D® Authorized Service. We know best how to service your bike with factory-approved methods and equipment assuring you of thorough and competent workmanship. Our regular maintenance always includes a comprehensive performance and safety inspection along with so much more. Why risk anything less?
- Replace engine oil, filter, and drain plug O-ring. Torque drain plug to proper specification. Ensure proper oil level at operating temperature.
- Check operation of all electrical equipment, lighting, and controls.
- Inspect front and rear tire tread depth and air pressure. Check tightness of oil spokes (if equipped).
- Inspect fluid level and moisture content of front brake reservoir. Check torque of cover screws.
- Check torque of switch housing screws, clutch level handlebar clamp screws, and master cylinder handlebar screws.
- Check engine coolant freeze point and inspect for leaks. Clean radiators or oil cooler.
- Drain and replace primary chaincase lubricant and drain plug O-ring. (if applicable)
- Drain and replace transmission lubricant and drain plug O-ring. (if applicable)
- Inspect oil, brake and fuel lines and fittings for leaks, contact, or abrasions.
- Inspect rear brake reservoir for proper fluid level and moisture content. Check torque of cover screws.
- Inspect front brake pads and discs. Ensure pad thickness is within specification.
- Inspect rear brake pads and discs. Ensure pad thickness is within specification.
- Check torque of front and rear axle nut.
- Inspect and lubricate jiffy stand.
- Lubricate clutch cable. Ensure proper cable adjustment and hand lever free play.
- Check, adjust, and lubricate brake and clutch controls.
- Inspect and adjust drive belt or chain. Inspect wheel sprocket.
- Inspect exhaust system for leaks, cracks and loose or missing fasteners or exhaust shields.
- Check battery, clean connections and torque terminal screws.
- Lubricate the fuel door, hinge, and latch.
- Check for open recalls, products campaigns, trouble codes, and software updates.
- Flush brake and clutch systems and replace DOT 4 brake and clutch fluids every two years.
- Road Test - verify component and system functions.
Depicted are areas serviced during the recommended 1000-mile service for 2024 Touring Models.
Refer to owner’s manual for more details.